Bike Furniture Design

MOTOR • PEDAL • DESIGN SINCE 1990

Below are the pieces that have been built for you so far.

Crown swivel Barstool with cowhide cushions, 28" high

Crown swivel Barstool with cowhide cushions, 28" high

Another view of the swivel barstool.

Another view of the swivel barstool.

I still have 1 of 4 of the Crown swivel Barstool with cowhide cushions . Below are pics of the cushions for them.

Milano Chair - Dining Version 18" seat height - qty 2 - COMPLETED

Milano Chair - Dining Version 18" seat height - qty 2 - COMPLETED

S-2 Swivel Barstool with back,j green glitter cushions - qty 2 - COMPLETED

S-2 Swivel Barstool with back,j green glitter cushions - qty 2 - COMPLETED

Stuffed Chair with inner-tube upholstery 1 of 4 I came up with a more durable method to use inner-tubes on this chair that I will be using on any future chairs that I make that use inner-tubes. 

Stuffed Chair with inner-tube upholstery 1 of 4
I came up with a more durable method to use inner-tubes on this chair that I will be using on any future chairs that I make that use inner-tubes. 

Stuffed Chair with inner-tube upholstery 2 of 4 - frame assembled

Stuffed Chair with inner-tube upholstery 2 of 4 - frame assembled

Moto Chair with wheel base. qty 1 - COMPLETED

Moto Chair with wheel base. qty 1 - COMPLETED

S-6 Barstool with inner-tube upholstery - qty 2 - COMPLETED

S-6 Barstool with inner-tube upholstery - qty 2 - COMPLETED

Stuffed Chair with inner-tube upholstery 1 of 4

Stuffed Chair with inner-tube upholstery 1 of 4

Stuffed Chair with inner-tube upholstery 2 of 4 - frame assembled

Stuffed Chair with inner-tube upholstery 2 of 4 - frame assembled

Moto Chair with wheel base. qty 1 - COMPLETED

Moto Chair with wheel base. qty 1 - COMPLETED

Items completed:

Milano Chair - Dining Version 18" seat height, black vinyl cushions - qty 2 - COMPLETED
S-2 Swivel Barstool with back,j green glitter cushions - qty 2 - COMPLETED
S-6 Barstool with inner-tube upholstery - qty 2 - COMPLETED
Moto Chair with wheel base. qty 1 - COMPLETED
Crown swivel Barstool with cowhide cushions, 28" high - qty 1 of 4
Stuffed Chair with inner-tube upholstery 1 of 4
Stuffed Chair with inner-tube upholstery 2 of 4 - frame assembled

Items that we still need to complete:

Crown Swivel Barstool with cowhide cushion - qty 3
Beach Star Roller Moto Chair with casters - qty 1
Stuffed Chair with inner-tube upholstery - qty 2
Modulus Lounge Chairs - qty 2   As I mentioned before these Modulus Lounge Chairs will be a challenge to build at an 18" seat height. One of the things that have taken a lot of time has been for me to reconfigure the Milano and Stuffed Chairs to get them to be able to have an 18" seat height. I have not made a Modulus Chair in that height. My experience with making the Milano Chair in the 18" height tells me that making the Modulus with inner-tube upholstery at 18" (and still be durable) may not be possible.  I may be able to do it with vinyl cushions like the one in the picture above next to the one of the other Modulus on the beach.

I can make this version of the Modulus chair with an 18" seat height. I know I can do it with vinyl cushions, and I might be able to do it with inner-tubes like those on the Stuffed Chair that I have completed for you.

I can make this version of the Modulus chair with an 18" seat height. I know I can do it with vinyl cushions, and I might be able to do it with inner-tubes like those on the Stuffed Chair that I have completed for you.

Rear view

Rear view

I don't think it will be possible to make this version of the Modulus Chair with an 18" seat height and with inner-tube upholstery in this configuration.

I don't think it will be possible to make this version of the Modulus Chair with an 18" seat height and with inner-tube upholstery in this configuration.

 I would also still like to suggest another option in place of the 2 Modulus Chairs. Our S-2 Chair. I can make them with an 18" seat height without delay. They can be either vinyl cushions or inner-tube upholstery.

S-2 Chair

S-2 Chair

S-2 Chair

S-2 Chair

Production schedule remaining is this:

1. Finish the second, and build the 3rd and 4th Stuffed Chairs. Could have them done by Wednesday or Thursday.
2. Build the remaining 3 Crown swivel stools, which will take about 3 days.
3. Build the 2 Modulus (or S-2) Chairs, which will take about 2-4 days depending on what version you decide to go with.
4. Build the last piece, The Moto Chair with casters.  This is the hardest for me to build. It could take a week.

The chair below was made in an attempt to redesign the Stuffed Chair that you ordered.  When I was having trouble getting the seat height to 18", I thought this configuration would be a solution, and spent a lot of time building it. Anyway, I solved the problem with the original Stuffed Chair, but I still have this prototype of the Stuffed Chair Type 2. It can have arms or no arms. Anyway, I could finish it and replace one of your chairs with this one, or add this chair to your other chairs if you are interested.