S-2 Coffee Table - Assembly Instructions

•Place the spoked rim/tire on a flat stable surface, with the tabs on the rim facing up.

•With a phillips screwdriver, remove the screws and washers from the tabs and set aside.

•With the feet facing up, place the table base over the tabs, with the blue tape on the base aligning with the blue tape on the spoked rim. The tabs go inside of the rim ends.

•Insert screws with washers through the rims and into the threaded tabs. Tighten with phillips screwdriver. (Do not overtighten)

•Tighten the 2 center bolts on the table base with a 10mm or adjustable wrench or pliers.

•Remove blue tape.

•Adjust threaded feet to level table if needed.

Please contact us if you have any questions, or if there are any problems.
call or text Andy Gregg: 906-361-2483
email: bikefurniture@gmail.com