Bike Furniture Design

MOTOR • PEDAL • DESIGN SINCE 1990

S-2 Pub Table - Assembly Instructions

•After removing the table base, and top rim from the packing, unfold the base and place on the ground with the tabs containing the bolts and nuts that are at one end of the base facing up.

•Remove the bolts and nuts, from the tabs, and set aside, making note of the direction that the bolts go through the tabs.

•Align the numbers on the blue tape next to the bolt holes on the top rim with the corresponding numbers on the blue tape on the base.

•Insert the bolts through the tabs and into the rim, and assemble the bolts. Tighten with 1/8” hex key.

•Turn the assembled base upside down. Depending on your preference, add either the threaded leveling feet, or the black rubber leg tips to the ends of the bottom of the base.

•Remove all of the blue tape.

•Place the table glass on the top of the table.

Please contact us if you have any questions, or if there are any problems.
call or text Andy Gregg: 906-361-2483
email: bikefurniture@gmail.com

2019-03-20 14.42.50.jpg
2019-03-20 14.24.50.jpg