S-2 Cafe and Pub Table - Assembly Instructions

•Place the spoked rim on a flat stable surface. Tabs on rim facing up. For the taller pub table, you can also place the base on its feet on the floor, and assemble from the top.

•Remove the screws and washers from the tabs and set aside.

•Place the table base over the tabs, with the blue tape on the base aligning with the blue tape on the spoked rim. The tabs go inside of the rim ends.

•Insert screws with washers through the rims and into the threaded tabs. You may need to push the spoked rim and the base rims together to get them to align closely, and the holes to align with the screws. Do not tighten all the way until all of the 4 screws have been threaded in.

•Tighten the 4 screws, being careful to not overtighten.

•Tighten the center bolts on the table base with a phillips screwdriver, if necessary. They should already be tight enough.

•Remove blue tape.

•Adjust threaded feet to level table if needed.

Please contact us if you have any questions, or if there are any problems.
call or text Andy Gregg: 906-361-2483
email: bikefurniture@gmail.com