Bike Furniture Design


S-2 Coffee Table - Assembly Instructions

•After removing the table base, and top rim from the packing, unfold the base and place on the ground with the rubber feet on the ground.

•Remove the bolts and washers from the tabs, and set aside, making note of the direction that the bolts go through the tabs.

•Align the blue tape on the top rim with the corresponding blue tape on the base.

•Insert the bolts with the washers through the holes on the base, and into the threaded tabs that have been inserted into the base. Tight with a 4mm hex key.

•Remove all of the blue tape.

•Place the table glass on the top of the table.

Please contact us if you have any questions, or if there are any problems.
call or text Andy Gregg: 906-361-2483

2019-03-21 15.13.11.jpg
2019-03-21 15.09.33.jpg