S-2 xo Cafe/Dining Chair - Assembly Instructions
•Tools needed: 13mm or 1/2” wrench
•After removing the chair from the packing, unfold the chair base and place on the ground. The 4 tabs at one end of the base should be facing up.
•Remove the bolts and washers from the chair seat, making note of the direction that the bolts go through the threaded holes
•Align the blue tape next to the bolt hole on chair seat with the corresponding blue tape on the chair base.
•Insert the bolts through the tabs and into the threaded inserts, being careful not to cross thread the bolts. Tighten with a 13mm or 1/2” wrench.
•Remove the blue tape.
•Have a seat!
Please contact us if you have any questions, or if there are any problems.
call or text Andy Gregg: 906-361-2483